»Array >> XO-206X Crossover

XO-206X Crossover

3-Way Active Crossover XLR Connectors (All Inputs and Outputs) Simplified One Control Setup for Both Channels Professional 24dB/Octave Linkwitz Reilly Filters Switchable 40Hz 12dB/Octave HPF Four Stage LED Output Meters with Clip LED Independent Output Polarity Switching Output Mute Switches with LED Indicators Individual Output Level Controls (–∞ dB to +6dB) Mono Summed Subwoofer Output 1U 19” Rackmount Chassis

The XO-206X is a 3 way stereo analogue active crossover that allows for the most simple and safe setup of a tri-amplified system.

The low/mid crossover frequency is sweepable from 60Hz to 1KHz providing an ideal frequency split between your subs and mid drivers, the mid/high crossover point is sweepable from 1KHz to 9KHz giving you enough range to effectively send an appropriate bandwidth to your mid and HF drivers.

Emphasis has been placed on the safety of your rig with a switchable 40Hz 12dB/octave HPF to increase headroom and independent switchable soft limiting on each of the bands to protect your amp and speakers.

To help fine tune the setup of your system there are mute switches for each of the bands and also independent polarity switching.

The XO-206X active crossover has independent output level control ranging from - to +6dB, to assist you there are LED output meters and a simple input clip LED.

All inputs and outputs are use balanced XLR connectors, a mono summed LF output is included for using a mono subwoofer in a stereo system. The XO-206X comes in a 1U 19” rackmount chassis and accepts mains power via an IEC connector.

SPECIFICATIONS
MODEL XO-206X
POWER SUPPLY  
OPERATING VOLTAGE 100VAC 50/60Hz, 120VAC 60Hz
POWER CONSUMPTION 230VAC 50/60Hz
MAINS CONNECTION 16W
INPUT/ OUTPUT  
CONNECTORS XLR (pin 2 hot)
INPUT IMPEDANCE Balanced 20k?, unbalanced 10k?
MAX INPUT LEVEL +20dBu balanced or unbalanced
OUTPUT IMPEDANCE Balanced/Unbalanced 100?
MAX OUTPUT LEVEL +21dBu balanced/unbalanced
SUBWOOFER OUTPUT XLR (pin 2 hot)
SYSTEM PERFORMANCE  
SIGNAL-TO-NOISE 90 dB
THD + NOISE <0.004%
INTERCHANNEL CROSSTALK <-80dB, 20Hz to 20kHz
FREQUENCY RANGE 60Hz -10kHz
HUM AND NOISE -95dB
FREQUENCY RESPONSE <10Hz to >40kHz, +2/-3dB
DIMENSIONS/WEIGHT IEC receptacle
DIMENSION 482.6x 173 x 44 mm
WEIGHT 2.97 kg