»Array >> XO-204 Crossover

XO-204 Crossover

Simplified one control setup for both channels Professional 24dB / oct, Linkwitz Reilly filters Switchable 40Hz 12dB/oct HPF Four LED output level meters plus input clip indicator Independent polarity switching of outputs Output mute switches with LED indicator Individual output level controls range from –inf dB to +6dB Mono Sum LF output Input gain variable between –inf and +6dB Balanced TRS Jack Inputs and Outputs 1U, 19” Rack mount chassis

The XO-204 is a 2 way stereo analogue active crossover that allows for the most simple and safe setup of a bi-amplified system.

The crossover frequency is sweepable from 60Hz to 1KHz providing an ideal frequency split suitable for feeding subs and full range units with discrete bandwidths right out of the box. If you wish to use the XO-204 to split the programme material in a manner that is suitable to feed the mid and high drivers in a bi-amp compatible full range unit the X10 switch conveniently raises the crossover frequency to allow for this.

Emphasis has been placed on the safety of your rig with a switchable 40Hz 12dB/octave HPF to increase headroom and independent switchable soft limiting on each of the bands to protect your amp and speakers.

To help fine tune the setup of your system there are mute switches for each of the bands and also independent polarity switching.

The XO-204 active crossover has independent output level control ranging from -infinity to +6dB, to assist you there are LED output meters and a simple input clip LED.

All inputs and outputs are on balanced TRS jacks and there is the inclusion of a mono summed LF output for using a mono subwoofer in a stereo situation. The XO-204 comes in a 1U 19” rackmount chassis and accepts mains power via an IEC connector.

SPECIFICATIONS
MODEL XO-204
POWER SUPPLY  
OPERATING VOLTAGE 100VAC 50/60Hz, 120VAC 60Hz,
POWER CONSUMPTION 230VAC 50/60Hz
MAINS CONNECTION 12W
INPUT/ OUTPUT  
CONNECTORS 1/4" TRS (pin 2 hot)
INPUT IMPEDANCE Balanced 20k ohm, Unbalanced 10k ohm
MAX INPUT LEVEL +20dBu balanced or unbalanced
OUTPUT IMPEDANCE Balanced 50ohm, Unbalanced 100ohm
MAX OUTPUT LEVEL +21dBu
SUBWOOFER OUTPUT 1/4" TRS (pin 2 hot)
SYSTEM PERFORMANCE  
SIGNAL-TO-NOISE 90 dB
THD + NOISE <0.004%
INTERCHANNEL CROSSTALK <-80dB, 20Hz to 20kHz
FREQUENCY RANGE 60Hz-10kHz
HUM AND NOISE -95dB
FREQUENCY RESPONSE <10Hz to >40kHz, +2/-3dB
DIMENSIONS/WEIGHT IEC receptacle
DIMENSION 482x 250 x 46mm
WEIGHT 2.92 kg